wang12
06-10 12:11 AM
Dear Sir or Madam,
Does anybody know the fax number of Nebraska Service Center or USCIS ?
Many thanks
Does anybody know the fax number of Nebraska Service Center or USCIS ?
Many thanks
wallpaper US in the Second World War
bigboy007
05-30 11:11 AM
I think then they go for a conference and agree upon a common point if not nothing is passed
vallabhu
12-20 11:13 AM
Does she have valid visa stamped on passport for the day she is landing in US?
2011 SPECIAL ~ WAR IS A RACKET
redcard
01-19 01:08 PM
Here is my understanding:
Situation 1-
1. Get New Visa Stamped:
If you get a new visa stamped, you will be entering on the new visa. The consular will cancel your old visa at the time of issue of new visa. My understanding is that you can have only one valid visa of the same type stamped at one time. The visa stamp does not have an effective date and it only has expiry date. Again this could have changed with all the changes in the last year or so,, but in the past they would cancel the old visa generally with the wordings �CWOP� across the old stamp at the time of new visa issue. If that�s the case you will enter on your new visa which will have the extended expiry date.
Situation 2
2. No New Visa Stamped and entering on the old visa
I am not sure how this works; because the new H1-B extension you just got has the same I-94 Number printed on the approval card (on the bottom left side) as the paper I-94 you have stapled on your Passport. Once you leave you will surrender your I-94 that�s on your passport and get a new I-94 when you enter which would have a new I-94 number which will now be different from your I-94 on the H1 B extension. I believe this I-94 will take precedence over the I-94 that you have on your H1-B approval since that will now show in the USCIS records as surrendered. Again this is my understanding but an attorney can give you a better advise on this..
Hope this helps..
Situation 1-
1. Get New Visa Stamped:
If you get a new visa stamped, you will be entering on the new visa. The consular will cancel your old visa at the time of issue of new visa. My understanding is that you can have only one valid visa of the same type stamped at one time. The visa stamp does not have an effective date and it only has expiry date. Again this could have changed with all the changes in the last year or so,, but in the past they would cancel the old visa generally with the wordings �CWOP� across the old stamp at the time of new visa issue. If that�s the case you will enter on your new visa which will have the extended expiry date.
Situation 2
2. No New Visa Stamped and entering on the old visa
I am not sure how this works; because the new H1-B extension you just got has the same I-94 Number printed on the approval card (on the bottom left side) as the paper I-94 you have stapled on your Passport. Once you leave you will surrender your I-94 that�s on your passport and get a new I-94 when you enter which would have a new I-94 number which will now be different from your I-94 on the H1 B extension. I believe this I-94 will take precedence over the I-94 that you have on your H1-B approval since that will now show in the USCIS records as surrendered. Again this is my understanding but an attorney can give you a better advise on this..
Hope this helps..
more...
karanp25
07-11 01:35 PM
yes, now we should all start calling uscis - atleast 10 times a day, open SRs, take 4-5 infopass appointments and maybe consider going to NSC or TSC in person to see if we can talk to the IO (or have a cup of tea with the IO) to expedite our respective cases.
Who knows, if we do such things, we mite get our GCs faster than ppl already waiting ahead of us in the queue. :)
I wud also take this oppurtunity to invite more EB3 ppl to convert to EB2 now....this way, u cud get a EB-2 PD back in time, when u were not qualified for EB2. And with all desi body shops, getting this done is a piece of cake, i would assume.
Now boot me from the forums or give me all those red marks - i don't care. I wrote what was on my mind.
Who knows, if we do such things, we mite get our GCs faster than ppl already waiting ahead of us in the queue. :)
I wud also take this oppurtunity to invite more EB3 ppl to convert to EB2 now....this way, u cud get a EB-2 PD back in time, when u were not qualified for EB2. And with all desi body shops, getting this done is a piece of cake, i would assume.
Now boot me from the forums or give me all those red marks - i don't care. I wrote what was on my mind.
LloydsApple
11-11 06:04 PM
that's what I thought but she has dealt with a lot of bs with all this paperwork so it is nice to have additional insight to ease traveling worries. Thanks!
more...
eastindia
11-16 02:05 PM
Good one! We see a lot of speculation here on open forums...there are much more realistic updates available on the donor forums...I just wish people don't waste time on speculations and mis-information floating around. Good luck to all of us!
I agree.
I agree.
2010 hair 2010 world war 1
abhay
01-03 11:13 AM
Yea, Dont let those european countries charge you for few hours of airport stay, They are taking advantage of people in the name of 9/11. I travelled via Middle east from DC, travel is shorter by 2 hours
more...
easygoer
05-15 11:31 AM
sr225,
Your experience obtained should be prior to filing of labor and should be for atleast five years. Then it is okay for you to go for EB2
Your experience obtained should be prior to filing of labor and should be for atleast five years. Then it is okay for you to go for EB2
hair world war 1 posters uk. world
needhelp!
02-12 05:15 PM
Thanks! Hope all will do it.
more...
forgerator
02-22 01:55 PM
I am trying to port from EB3-EB2 from the same employer.
Prior to joining the employer, I had MS+2 years of experience. However, the lawyer applied in EB3. The job description read:
Required: BS+3
MS+1 also accepted
Experience in technologies A,B,C,D
I applied based on my MS+1 experience. Now the same company has another position with a very similar job description with a different title.
Required:MS+1
Experience in technologies A,B,C,D
Q1. Would this qualify for a EB2 position? Do I have to worry about the job descriptions being almost similar
Q2. The titles are different. But the EB2 position doesn't have "Senior" in the position title. Is there a need to worry?
Any replies are really appreciated.
isthereawayout, you and I are in exactly the same situation.
In my case , back in 2007, I was filed under EB3 for a Software Developer position, even though I had MS + 2yr exp. However the job was such that it required Bachelor + 2yr so it was filed under EB3.
Last year, I got promoted to Senior Software Developer. Employer is filing me under EB2 this time, and will use same experience as the one from EB3 , i.e. MS + 2 yr exp. However this time the job is such that it requires Bachelor + 5 yr.
The only difference I believe is the Job description of the posting itself. In that, they have requested experience in technologies which are different from the ones listed in my EB3 job description.
Hope that answers your question.
Prior to joining the employer, I had MS+2 years of experience. However, the lawyer applied in EB3. The job description read:
Required: BS+3
MS+1 also accepted
Experience in technologies A,B,C,D
I applied based on my MS+1 experience. Now the same company has another position with a very similar job description with a different title.
Required:MS+1
Experience in technologies A,B,C,D
Q1. Would this qualify for a EB2 position? Do I have to worry about the job descriptions being almost similar
Q2. The titles are different. But the EB2 position doesn't have "Senior" in the position title. Is there a need to worry?
Any replies are really appreciated.
isthereawayout, you and I are in exactly the same situation.
In my case , back in 2007, I was filed under EB3 for a Software Developer position, even though I had MS + 2yr exp. However the job was such that it required Bachelor + 2yr so it was filed under EB3.
Last year, I got promoted to Senior Software Developer. Employer is filing me under EB2 this time, and will use same experience as the one from EB3 , i.e. MS + 2 yr exp. However this time the job is such that it requires Bachelor + 5 yr.
The only difference I believe is the Job description of the posting itself. In that, they have requested experience in technologies which are different from the ones listed in my EB3 job description.
Hope that answers your question.
hot Poster 2
vishwak
02-11 01:18 PM
You need to verify what they are feeling and why they are filling in forms.
Should have knowledge of process and you should be fine with any Attorney.
Unless you go to THE CHEAPEST ATTORNEY who never has experience in handling tough scenarios.
Should have knowledge of process and you should be fine with any Attorney.
Unless you go to THE CHEAPEST ATTORNEY who never has experience in handling tough scenarios.
more...
house world war 1 propaganda posters
perm2gc
04-27 02:25 PM
Hi Gurus
I have applied for H-1 extension using my I-140 and got an RFE asking for the client letter.The querry was replied on time but now the online status shows that the extension was denied and the reason will me mailed.I spoke to my company and they are ready to appeal once they receive the reason for the denial.I was on-job for all the 5 years of my stay in US and working for the same employer and client for the past four and half years.Not sure the reason of denial as of now. Now that my Visa and I-94 expired on March'31 2009 how long can I stay while the appeal is the process and what are the
other options left for me?
Applied for H-1 extenstion Feb'5 2009
RFE Date - Mar' 12 2009
Denial Date - Apr'24 2009
I797 Expiry - March'31 2009
how was the query replied ?
I have applied for H-1 extension using my I-140 and got an RFE asking for the client letter.The querry was replied on time but now the online status shows that the extension was denied and the reason will me mailed.I spoke to my company and they are ready to appeal once they receive the reason for the denial.I was on-job for all the 5 years of my stay in US and working for the same employer and client for the past four and half years.Not sure the reason of denial as of now. Now that my Visa and I-94 expired on March'31 2009 how long can I stay while the appeal is the process and what are the
other options left for me?
Applied for H-1 extenstion Feb'5 2009
RFE Date - Mar' 12 2009
Denial Date - Apr'24 2009
I797 Expiry - March'31 2009
how was the query replied ?
tattoo of the Second World War in
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
more...
pictures Unknown (Second World War)
jamesbond007
12-08 04:39 PM
I wish! :)
I am pretty sure Obama-Biden's team does not want to see the headlines like "Foreigners" on Obama-Biden's transition team!
Yes. We are foreigners no matter how much tax we pay or how law abiding we are...
Let us not assume. The worst that can happen from this request for a seat at the table is that they will deny the request.
There is a first time for everything. The transition team having a transparent open door policy for anyone's suggestion itself is a novel idea.
Obama and company are looking for ways to create jobs and revive the economy. Any idea that works towards those goals, I am pretty sure they will be all ears.
I am pretty sure Obama-Biden's team does not want to see the headlines like "Foreigners" on Obama-Biden's transition team!
Yes. We are foreigners no matter how much tax we pay or how law abiding we are...
Let us not assume. The worst that can happen from this request for a seat at the table is that they will deny the request.
There is a first time for everything. The transition team having a transparent open door policy for anyone's suggestion itself is a novel idea.
Obama and company are looking for ways to create jobs and revive the economy. Any idea that works towards those goals, I am pretty sure they will be all ears.
dresses the Second World War.
gc4me
04-07 03:58 PM
I was in the same situation. Got my I-140 through FOIA, my I-824 got rejected (applied both whichever comes first). Check the bellow thread that I created and posted my experience.
http://immigrationvoice.org/forum/showthread.php?t=16863&highlight=FOIA
I am planning to change jobs using the EAD / AC-21 in the next couple of months. To start off the process I wanted to get all the approval notices from the lawyer so that I have all the documents in place before I change jobs.
My employer uses a popular law firm to handle the immigration filing etc. I sent an email to the lawyer asking them to send me a copy of the I-140 approval notice.The lawyer responded that according to my company's internal policy they will not provide me a copy of the I-140 approval notice.
I would like to know the following -
1) Has someone else also faced a similar issue ?
2) If so , is there a way to get them to send me a copy of th 140 approval notice
3) Does the employer by law have the authority to restrict the distribution of the 140 approval notice
4) Do I need the 140 approval notice in order to use EAD/AC-21 to change jobs ?
Thanks
http://immigrationvoice.org/forum/showthread.php?t=16863&highlight=FOIA
I am planning to change jobs using the EAD / AC-21 in the next couple of months. To start off the process I wanted to get all the approval notices from the lawyer so that I have all the documents in place before I change jobs.
My employer uses a popular law firm to handle the immigration filing etc. I sent an email to the lawyer asking them to send me a copy of the I-140 approval notice.The lawyer responded that according to my company's internal policy they will not provide me a copy of the I-140 approval notice.
I would like to know the following -
1) Has someone else also faced a similar issue ?
2) If so , is there a way to get them to send me a copy of th 140 approval notice
3) Does the employer by law have the authority to restrict the distribution of the 140 approval notice
4) Do I need the 140 approval notice in order to use EAD/AC-21 to change jobs ?
Thanks
more...
makeup Second World War Propaganda.
nixone
08-27 10:03 AM
Thanks chantu and fresheb2.
I have one more question regarding plane tickets. My parents bought ticket that has OPEN RETURN DATE, but the maximum validity of the ticket is SIX months.
They do not know the exact date when they are going to return and they also do not know how long the stay permit will be given to them (even though I have heard that normally 6-month stay is given). Now some people are saying that the Officer at Port of Entry does not like when there is no specific date of return.
Do you guys think my parents need to change the ticket or they need to have the return date mentioned on the ticket (the date that we do not know yet)? They are flying in less than 2 days. Thanks.
I have one more question regarding plane tickets. My parents bought ticket that has OPEN RETURN DATE, but the maximum validity of the ticket is SIX months.
They do not know the exact date when they are going to return and they also do not know how long the stay permit will be given to them (even though I have heard that normally 6-month stay is given). Now some people are saying that the Officer at Port of Entry does not like when there is no specific date of return.
Do you guys think my parents need to change the ticket or they need to have the return date mentioned on the ticket (the date that we do not know yet)? They are flying in less than 2 days. Thanks.
girlfriend Vintage World War II poster
tampacoolie
06-29 11:01 AM
My documents will reach attorney on Monday and he promised to file before July4.
hairstyles of Second World War
![second world war posters. 2011 [Poster] second world war](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgYS-3UPUhS_p-j1LDHBI3zwHs2VICjrJWv_yj5BghJH0PNXF81_VTGkq2VySZdOxJCEfctdHnFQ5tg3_snRBw6jORcBC4kHpk3WBy9vrbnU9ryajsy2WUcVHOXnETOjGzzpiAU4CANAhM/s1600/SOVIET-RUSSIAN-PROPAGANDA-POSTERS-WW2-SECOND-WORLD-WAR-021.jpg "2011 [Poster] second world war")
rjgleason
October 25th, 2005, 04:26 PM
In and around SFO and maybe the outer area might be nice....definitely the Golden Gate at its best hours.
ken
04-08 03:25 PM
Is there anyone who is in similar situation?..
immigrationSantosh
02-07 03:29 PM
Could you please advise how do I get the lawyer for this ? Do you know any in specific?
No comments:
Post a Comment